Home

About us

Products

Services

Achievements

Contact

Energy Division – Wholesaler of renewable energy equipment
Tel: 514-333-6414 Customer login | Français
 
Browse by category
Iota logo

Iota 120VAC / 54VDC - 13A battery charger. IQ4 smart controller sold separately. Model is not UL listed

Iota 120VAC / 54VDC - 13A battery charger. IQ4 smaIota 120VAC / 54VDC - 13A battery charger. IQ4 smaIota 120VAC / 54VDC - 13A battery charger. IQ4 sma
Questions about this product? Contact us:
*
*
*
*
*
The DLS-54-13 power converter/battery charger from IOTA Engineering converts nominal 108-132 AC voltage to 54.4 DC voltage for both DC load operation and 48V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 48 VDC load up to 13 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-54-13 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Dual voltage jack

The DLS-54-13 is equipped with a dual voltage jack and dual voltage plug that allows manual switching from a long-term float voltage of 54.4 VDC to 59 VDC. When the dual voltage plug is inserted in the jack, the voltage increases to 59 VDC for occasional fast charging. When the plug is removed, the voltage drops to 54.4 VDC to reduce battery water loss. The dual voltage jack also allows for easy installation of an external IQ4 smart charger (sold separately) for automatic 3-stage charging (optional). If the unit is equipped with an internal IQ4 smart charger, two-step charging is not needed and the dual voltage jack is disabled.

Features

  • Switch-mode technology
  • Exceptionally clean DC output
  • Tight line-load regulation
  • Quickly and efficiently charges batteries
  • Designed to withstand low transient AC line voltage
  • Current limit and thermal/overload protection
  • Lower operating temperature
  • Proportional fan control circuitry allows fan to start and stop slowly for quiet fan operation
  • External reverse polarity fuse protection from incorrect battery connection
  • Charging jack allows for normal and high-stage charging
  • Compatible with IOTA IQ smart charger for automatic three-stage charging
Input voltage [V]120
Output voltage [V]54.4
Maximum Current 48V Battery [A]13
Max. continuous output power [W]700
ProtectionShort circuit, overload, thermal
Ambient temperature [C]0 to +40
Width [cm]17.02
Height [cm]8.64
Depth [cm]24.64
Weight [kg]2.3
Warranty [years]2 years
Battery voltage [V]48
Supported battery typesLead acid, AGM, GEL, Lithium