Home

About us

Products

Services

Achievements

Contact

Energy Division – Wholesaler of renewable energy equipment
Tel: 514-333-6414 Customer login | Français
 
Browse by category
Apollo Solar logo

Apollo high voltage T80 TurboCharger MPPT charge controller, 80A, 200 Voc input

Apollo high voltage T80 TurboCharger MPPT charge c
Questions about this product? Contact us:
*
*
*
*
*
The Apollo T80 TurboCharger integrates Maximum Power Point Tracking, battery charge management, state of charge information and communications into a single device. With 80 amps continuous output, the T80 has the largest capacity in the industry by over 30%.

Continuous power rating up to 45ºC ambient

The T80 TurboCharger produces full-rated power without de-rating at up to 45ºC ambient temperature. Above that, the output current is reduced gradually to protect the life of the T80 and then automatically ramped up as the temperature decreases. High efficiency power circuits and robust thermal design minimize heat generation. The internal temperature-controlled variable speed fan runs just fast enough to maintain optimum reliability.

Energy monitor built in

The T80 includes a built-in energy monitor using TriMetric technology from Bogart Engineering. The monitor tracks power production and consumption to calculate the energy remaining in the battery.

Enhanced battery performance and life

The T80 supports flooded lead acid, GEL and AGM batteries. Four-stage charging with adjustable set points for all parameters.

Optimum MPPT / charging efficiency cuts costs

The T80 captures up to 35% more power from the photovoltaic array with MPPT technology. The Apollo MPPT algorithm starts early and locks onto the peak power during rapidly changing insolation and temperature. The T80 dramatically cuts the cost of a PV system by reducing the number of PV panels required, eliminating the need for heavy gauge wiring, and increasing the life of the storage batteries.

Integral performance-and-update communications

The slot for optional add-in cards provides data communication to Remote Displays, PCs and the Internet. System performance can be monitored remotely and the T80 accepts software upgrades using a PC and the Remote Display's SD memory card.
TypeMPPT
Battery voltage [V]12, 24, 48
Maximum Current 12V Battery [A]80
Maximum Current 24V Battery [A]80
Maximum Current 48V Battery [A]80
Max. PV Array @ 12V [W]1300
Max. PV Array @ 24V [W]2600
Max. PV Array @ 48V [W]5200
Max PV Open Circuit Voltage 12V [V]200
Max PV Open Circuit Voltage 24V [V]200
Max PV Open Circuit Voltage 48V [V]200
Efficiency [%]95
Supported battery typesLead acid, AGM, GEL
Terminal Block Size [AWG]3
Terminal Block Temp Rating [C]90
Ambient temperature [C]-40 to +45
GroundingNegative
Charge regulation modesBulk, absorpt, float, auto/manual
DisplayBuilt-in 4 line 20 character LCD
Data communication optionsCard slot for optional network card
CertificationsUL1741, CSA C22.2 no. 107.1
Width [cm]21.6
Height [cm]38.7
Depth [cm]11.1
Weight [kg]7.3
Warranty [years]5 years