This DC to DC converter can be used to step up from a lower voltage battery or DC source to a higher voltage load. It can handle resistive or inductive loads with high inrush currents. This unit has built in current limit.
The unit will regulate at a constant 24V which is factory default (can be adjusted afterward). By adding "Rxx" to the end of the part number, where "xx" is the regulation voltage, the unit can be set at the factory for a specific output voltage. Output voltage range can be anywhere between the input voltage to a maximum of 30V.
Features
- > 95% efficiency, typically 96% over 20% load
- Simple to use
- Weatherproof, NEMA 4 enclosure