Victron MultiPlus 2000VA inverter/charger, 120V, PowerAssist, 24V.

Victron Energy MultiPlus 2000VA 120V is a multifunction inverter/charger that combines a true sine wave inverter, an adaptive multi‑stage battery charger and a 50 A high‑speed AC transfer switch in one compact enclosure. It supports parallel operation (up to six units) and three‑phase configuration (three units). PowerControl limits generator or shore current to prevent overloads, while PowerAssist boosts limited AC sources with battery power during peaks, then recharges when loads drop. The four‑stage adaptive charger provides absorption, float and storage modes and adds an independent trickle output for a starter battery (12 V and 24 V models). High start‑up power handles inrush loads; Search Mode reduces no‑load consumption by ~70%. A programmable relay (default alarm) and VE.Bus communication support system integration, remote monitoring and configuration via DIP switches, VE‑Configure, or a GX device (e.g., Cerbo GX) with VRM portal access. Key inverter specs include 120 VAC ±2%, 60 Hz ±0.1% output (adjustable to 50 Hz), 2000 VA/1600 W continuous at 25 °C, 3500 W peak, and up to 95% efficiency. The charger accepts 95–140 VAC, 45–65 Hz input and delivers model‑dependent charge voltages/currents for 12/24/48 V systems. The steel IP22 enclosure provides M8 battery posts and 13 mm² (6 AWG) screw terminals; operating range is −40 to +65 °C (fan assisted), humidity max 95%. Conforms to EN‑IEC 60335‑1/‑2‑29, EN 62109‑1, EMC standards EN 55014‑1/‑2, EN‑IEC 61000‑3‑2/‑3, IEC 61000‑6‑1/‑2/‑3, and Automotive Directive ECE R10‑5.