Home

About us

Products

Services

Achievements

Contact

Energy Division – Wholesaler of renewable energy equipment
Tel: 514-333-6414 Customer login | Français
 
Browse by category
MidNite Solar logo

Pre-wired Midnite Solar combination box, 4 x 600 VDC fuse holders, MC4

Pre-wired Midnite Solar combination box, 4 x 600 V
Questions about this product? Contact us:
*
*
*
*
*
Some installations may benefit from a plug & play combiner. The Midnite Solar MNPV4-MC4 and the MNPV4-TYCO each have 4 fuse holders, 15 amps fuses and bulkhead mount connectors already installed and wired.

This combiner is rated for outdoor use. Designed for combining high voltage strings using 10 mm x 38 mm fuses up to 80 amps total. Designed for combining high voltage strings using 10 mm x 38 mm fuses up to 80 amps total. The use of touch safe din rail mount fuse holders and fuses allow operation up to 600 volts. The MNPV4 is rated for up to 80 amps.

Features

  • Fast, convenient hook up with industry standard connectors
  • All aluminum powder coated housing that won’t rust
  • Flip up cover that can stay in the open position during installation
  • PV negative bus bar with #6 and 1/0 connections
  • Chassis ground bus bar with #6 and 1/0 connections
  • Standard DIN rail with (x) 30 amp touch safe fuse holders. 15 amp fuses included.
  • Tin plated copper bus bar that connect PV Plus outputs
  • Dead front cover snaps into place after wiring is complete for safety
  • Connectors for PV in and PV out on bottom, additional knockouts on bottom and sides
  • Top surface is available to bring conduit in from directly above the enclosure
TypeKLKD
Minimum Current [A]1
Maximum Current [A]80
Fuse holder position4
Maximum Voltage [VCC]600
ProtectionNEMA 3R rainproof
MaterialAluminum
Height [cm]40.6
Width [cm]20.3
Depth [cm]11.4
Weight [kg]2.3
CertificationsETL listed to UL1741 for use in the US and Canada
Warranty [years]5