Horizontal pole support for 6 modules, 2 poles not included. Tilt angle from 10° to 60°, maximum post height of 6-feet above ground

This kit is designed to work with solar panels with a Frame length of 38 to 72 inches long.
The PGRM mount can be used with modules that meet the following specifications:
·It's at least 35 inches from end to end on the inside end of the frame.
·Frame thickness is between 1.18 and 2.0 inches.
·No maximum length or width when the following parameters are followed:
oThe full solar PV array falls within the total square footage limits for PGRM mount.
oThe Mid/End clamps are suitable per specific module installation standards.

The Horizontal Pole Mount is an extremely sturdy, universal pole mounting solution. With its user adjustable angle settings (0 to 60), the Horizontal Pole Mount can support installations in a wide range of locations. Note: A 4" SCH-40 support pipe and 3" SCH-40 main beam pipe are user supplied.

Features:
·Number of Modules: 6
·Designed for 115 mph wind speeds, additional bracing is available for higher wind speeds
·Easily installed and adjusted by a single person
·Pre-galvanized
·Stainless Steel Hardware
·10 Year Warranty