 |
Lorentz Power Pack 600H to power Lorentz PS600 HR/C and PS1200-HR solar pump systems from a generator or utility power
|
The AC Power Pack AC/DC converter is used to power Lorentz PS solar pump systems from a generator or utility power.
The problem
Some solar pumps may not provide sufficient flow under all conditions, especially in unusually cloudy weather or when sufficient storage cannot be provided.
The solution
Lorentz AC Power Pack allows the pump to be powered by an AC generator or commercial utility power. The solar array remains connected. If the sun comes out again, less power is drawn from the AC source.
A common application is for a portable generator to run a well pump. When the generator is stopped (or runs out of fuel) the pump automatically returns to solar power when the sunshine is sufficient. No manual switching is required. The Power Pack can also be integrated with a Lorentz SunSwitch.
The Power Pack will power the pump to its full capacity. With some systems, it will produce a greater flow rate than you will see with solar power.
| Input voltage [V] | 115, 230 |
| Maximum Current [A] | 6.4 |
| Output voltage [V] | 75, 110 |
| Max. continuous output power [W] | 700 |
| Protection | Overload protection: internal fuse, 10A |
| Certifications | IP42 |
| Material | Enclosure: steel |
| Note (1) | PV input voltage: Vmp: 55-130 VDC |
| Note (2) | Umax: 200 VDC |
| Note (3) | Must be protected from direct mid-day sun |
| Width [cm] | 30 |
| Height [cm] | 39.9 |
| Depth [cm] | 14 |
| Weight [kg] | 15.9 |
| Warranty [years] | 2 year |
