Morningstar SunSaver MPPT charge controller 15A, 7-36 VDC(min. qty: 10)

Morningstar’s SunSaver MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV and also provides load control to prevent over discharge of the battery.

The SunSaver MPPT is well suited for both professional and consumer PV applications including automatic lighting control. Its charging process has been optimized for long battery life and improved system performance. This product is epoxy encapsulated for environmental protection, may be adjusted by the user via four settings switches or connection to a personal computer, and has an optional remote meter and battery temperature sensor.

Key features and benefits

• TrakStar MPPT technology features peak efficiency of over 97%, almost no power losses, recognition of multiple power peaks during shading or mixed PV arrays and excellent performance at low solar insolation levels
• Enables the use of high voltage and thin film modules for off-grid battery charging
• Provides a means to use up to a 36V PV array to charge either a 24V or 12V battery
• Less expensive than other MPPT controllers and is affordable in smaller PV systems up to 400Wp. Allows system costs to be reduced by down-sizing the PV array, using on-grid or thin film modules and decreasing cable sizes.
• Up to four programmable timer sequences for PV lighting applications
• Mechanical dimensions are less than other MPPT controllers, making it easier to install in equipment enclosures
• Efficient electronics, a conservative thermal design and tropicalization result in high reliability and long life
• User selection via on-board switches or PC connection
• Fully protected against most system errors and faults
• Efficient MPPT tracking and 4-stage charging increases battery life
• The status LED’s and optional meter provide extensive controller and system data
• Records key operating parameters of the PV system and includes 30 days of data logging